Garage Door

Garage Door Repair – Do It by Yourself

Since a garage door is a combination of multiple components. Garage door repair should be a complicated job for an immature individual.

The power of operations is provided by the torsion springs whether your garage door swings up as a single piece or rolls up in multiple sections. Whenever the garage door is stuck on its tracks, it is always advised to check the metal tracks to find out any obstructions or loose mounting brackets. They are used to keep the tracks in place to the wall; they often become loose which need to be tightened. You can fix this issue by just tightening the screws and bolts inside the brackets.

You will have to inspect the garage door to find out any deformities on the tracks. If you found any dents, bumps, or flattened spots, you can fix them by just pounding out them using a rubber mallet. However, if the tracks are damaged badly or out of shape which cannot be fixed using a hammer, then they should be replaced with a new one.

Once you make sure that the smoothness of the tracks is there, you should inspect them once again to observe their alignment because the metal tracks on both sides need to be at the exact height along with the walls. If you found them imbalanced, just loosen the screws, bolts, and nuts holding the mounting brackets, then tap the tracks into their right position and re-tighten the screws and bolts of mounting brackets to make sure that there is no more alignment problem. 

Check the rollers of the garage door which holds the hinges of the garage door and tracks to make sure that they are cleaned properly. It is important for the smooth and flawless functionality of the garage door. However, if rollers seem dirty or rusty then use a mild household cleaner to make sure that any rusty signs, hardened grease deposits, or dirt are removed.  Once the deep cleaning is done, you will have to perform some general inspection of every part to make sure that there is no loose moving hardware is left.

If you would spend a little bit more time and attention taking care of the loose hardware on a regular basis, you can avoid certain issues related to the performance of the garage door. Even though washing the garage door periodically will help you to fix several problems. However, if any part of the garage door needs quick replacement, you should do it as soon as possible to avoid any major repairing bills.

I hope by following the above-mentioned techniques, you will easily be able to fix your malfunctioning garage door and it will also help you to save a lot of money, time, and effort in a long run.


Garage Door Springs Are Dangerous

Depending on the type and material, a standard garage door can weigh up to five hundred pounds.

Do you think what makes it easy and smooth to open or close the garage door by hand or using a remote control, definitely they are garage door springs? There are a lot of things which you will have to learn about the job and characteristics of springs. Remember, they are constantly placed under extreme pressure in order to function properly. Go here for help because the more you learn you will realize how important it is to well-maintained and efficient garage door springs. These springs should be inspected, checked, and maintained at least at the beginning of summer and winter.

How many times during a day do you operate your garage door? You may take it for granted and don’t realize that the garage door springs can be a dangerous part. When you open your garage door, the torsion springs which hold the pressure will release their stored energy and go to their most relaxed position.

When the garage door is closed properly, the springs are in their most tensed position. In this situation, the energy can cause serious injuries if the stored energy was suddenly be released. The sudden release occurs when the springs break suddenly while performing an opening or closing tasks.

If it has been more than five years since you have had replaced the springs, then it is the right time to change it immediately. Old or malfunctioned garage door springs can break at any time and release flying chunks of steel at high speed that can kill someone who is around the garage door at that time.

Adjusting the torsion springs simply means making the springs either tighter or loose enough. A properly adjusted garage door with an efficient spring will stay a few feet away from closing; it will not either rise or fall suddenly. It is a simple concept but not easy to accomplish and can be dangerous to handle. If the torsion springs are too loose, the garage door can slam down and if they are too tight, the garage door will suddenly fly open. It can be fatal to injuries in both cases.

Among all Do-It-Yourself projects which you like to conduct around your house unless you have performed it a few times before it is a good idea to hire a professional garage door technician when it concerns adjusting or replacing the torsion garage door springs. A little mistake can be fatal and cause serious injuries. Many garage door companies warranties on their products and guarantee their services.

Few Steps in a Garage Door Installation

Garage door installation is not as difficult as it sounds. As long as you follow the manual’s directions provided by the manufacturer, it can be completed in just four hours. Keep in mind that larger garage doors are harder to install than smaller residential garage doors.  

First of all, many pieces and components can confuse you. There are several parts that need to assemble such as, rollers, hinges, cables, metal tracks, handles, panels, springs, garage door locks, and many more. Reputed garage door manufacturers are now creating user-friendly kits along with simple installation instructions. However, there are still a lot of parts that need to be assembled professionally as long as you read the instructions and follow them religiously, and then you will get more reliable and efficient results. Following mentioned are the simple tips which will help you in garage door installation.  

  • The first aspect of the project is to remove the old garage door (if you have). It is advisable to hire a professional garage door installer to help you in this regard since there is a tendency that you might be got hurt due to the powerful springs of the existing garage door.
  • To make sure that the garage door is operated smoothly it should be aligned properly. The bottom tracks must be parallel and balanced to each other. It is important for the first section to be installed perfectly to maintain the balance of the garage door.
  • Make sure that you are using the right hardware recommended by the manufacturer. You will have to pay special attention to the bottom brackets of the garage door. Make sure that they are tightened securely and avoid over tightening them. 
  • A one-piece garage door is easier to install than others. Make sure that overhead tracks are placed securely and should be balanced perfectly. Any disorder can result in direction and the garage door comes out of the track. It is good to remember that there are several incidents wherein the garage door fell from its track and injured anyone around it.
  •  The most important and critical part which needs close attention is the installation of springs. If garage door springs are not adjusted perfectly, the garage door will not open or close smoothly or may get stuck at its half path to opening. Make sure that you have installed the springs properly by maintaining the required tension.  

Again, hire a professional garage door installer to do this project since the garage door is a large, heavy, and complicated combination of multiple parts. If you are capable of handling it yourself, you will be able to save a lot of money and feeling proud about the achievement and satisfaction of handling the job yourself.

Note: Never try to repair or adjust the torsion springs because they are normally placed under extreme pressure which could make the situation worst. Instead, it is advisable to consult a professional garage door installer to manage the work rather than trying to attempt it on your own.

Garage Door Spring Repair – Call a Professional Technician

Before conducting garage door torsion spring repair or replacement on your own, you should be aware of some important factors. First of all, garage door springs hold a high amount of pressure. If they snap accidentally, there is a possibility that they can to serious injuries and damages. The advised action to perform, especially if you are not experienced in handling these types of projects is to call a professional garage door services. Their experts are properly educated and trained equipped with the right tools and devices required to replace or repair the springs. 

Garage door springs are placed on both sides of the garage door. Even if you are facing trouble with only one spring, changing both at the same time is recommended. If one breaks, others will likely follow it shortly. Garage door springs are generally ideal for approximately 10,000 operating cycles before need replacement. There are two types of springs used for garage door, one is an extension or looped springs and the other is torsion springs. It is the type of springs which is not easy to be handled by a person who is not in the field of the garage door. It is a major problem due to which an average person will not be advised to attempt a garage door springs repair. Finding the right springs which have an exact diameter is another problem. Many manufacturers are advised not to sell the springs directly to the consumers. They are advised to sell the products to the dealers and broker to avoid accidents.

If you have decided to find out the springs and replace them on your own, you will probably be in for an extensive search. Searching for the right type, size, and diameter of the springs is not an easy task. Don’t ignore the diameter of springs because the measurement must be similar because there are several kinds of springs under one category. The size, length of wire, and inside diameter of the spring will be calculated to determine the right measurement. If your garage door has torsion springs, there are two mounted on each side of the door. The measurement of spring cannot be off even by few inches because each size is specifically designed to counterbalance the garage door. It determines the amount of pressure that is required while smoothly opening and closing the garage door.

Furthermore, when you conduct garage door spring replacement on your own, if something is going wrong and the garage door does not function properly afterward, you must restart all the process.

It could be frustrating and expensive. Having professional services to deal with the garage door spring replacement, it will give you a lot of benefits because their services should be guaranteed. It is one of the important factors which you will consider before hiring a professional garage door expert. The parts they are used also come under guaranty as well. It means that if something goes wrong in a few days, they will come back and deal with the issue without charging any bill to you. Therefore, the cost which is incurred while conducting DIY garage door spring repair or replacement is going to be less if you hire an expert that specializes in the field of garage door spring repair.

Garage Door Repair and Replacement Advice from the Experts

Nowadays automatic garage doors are installed in every home. These garage door models are efficient and superior to the manually operated models. Modern garage doors offer a lot of advantages, for example, you don’t have to worry about securing a locking the garage door every time when you leave your place. You don’t have to leave your car to operate large or heavy equipment. You can open and close the garage door with the help of remote conveniently.

As with the most equipment, manual models are incredibly strong, durable, and need little maintenance. On the opposite side, automatic garage doors have a trend to break down eventually. The question is here WHY? No doubt, there constructions and operations seem strong and simple but there are various factors that can go wrong with the electric models of garage doors, especially when they have electric garage door openers. 

Garage door troubleshooting tips and techniques: To troubleshoot the problems with automatic garage doors, the first thing any homeowner should do is to pull the cord comes from the electric motor. Once you disconnect the garage door, you will be able to operate it manually. If it runs up and down on the tracks smoothly, then the problem is the garage door motor, not the structure. If you are not able to operate it by hand, the problem could be the springs. Either the problems, you will have to hire a professional garage door company like, garage door repair services in Oakland, CA as soon as possible.

Do you really need professional help? Yes, of course! I cannot emphasize how essential it is to discover a professional garage door technician. Electric garage doors are dangerous and hard to handle for you even if you are a handyman and accomplished a lot of DIY projects.  These garage doors are a combination of hundreds of moving components including cables, hinges, and springs. It is not simply projected for the average handyperson. Furthermore, if you realize that you have to change the motor or structure, there is no other option than hiring a pro.

How to find the right garage door service provider: Start by asking your relatives and friends to evaluate which services they have used. Since every home has an automatic garage door that occasionally needs maintaining and repairing services, therefore, finding a reputed and reliable garage door contractor should not be that hard.  As you know the installation and replacement of the automatic garage door is a big project, you should conduct a short interview with any prospective technicians. You should ask them about their education, experience in the field, certification, how long the project will take, and they are available to do the work. You can also demand rough and free estimation.  In order to get an accurate price quotation, invite them to visit your place and have a look at your setup.

Is the replacement needed? There are plenty of garage door companies that provide a wide range of options if you want to install a new model and style of the garage door. Garage door replacement can be a dangerous and risky job; you should always hire professional garage door contractors. Most companies will provide you a free estimation for new garage door installation, if you accept the quote, you will be asked to sign a contract form before starting a job. It is always good to read all the terms and conditions of the contract before signing it. Finally, I want to sum up my finding and want to say, if your electric garage door is on the fritz, don’t ever attempt any DIY project. Contact a certified and reputed garage door repair company to handle the work for you.